Covering the yard: asphalt or paving slabs

A well-kept yard is not only pleasing to the eye. Rational paving of the local area of ​​an apartment building ensures cleanliness in the entrance. Covered areas of sidewalks and driveways reduce the amount of dust in the air. This indicator is especially important for small residents and allergy sufferers. How to cover the local area with asphalt? Who pays for expensive work? What do residents need to do to ensure that the coating lasts a long time and does not “fall off” along with the snow? These questions are relevant for many owners. We'll tell you how to get your yard in order.

How to asphalt the local area?

Do not try to roll all open areas of land into asphalt. Take a rational approach to the improvement of paths to avoid excessive financial burden.

Experts advise carrying out road work in the following areas:

1. Where it is planned to park in the local area for residents' cars.
2. Paths leading to recreation areas.
3. An area near the entrance.
4. The blind area around the MKD.

The optimal dimensions of asphalt areas have been developed. For example, the blind area is made at least 100 centimeters wide so that it serves as a sidewalk. The size of the area in front of the entrance can reach up to 500 centimeters. Pedestrian paths are made so wide that cleaning equipment can pass through them.

For many residents of high-rise buildings, the arrangement of playgrounds in their yards is a sore point. We described how to legally and competently solve this problem in a separate article. How to find out the local area of ​​an apartment building in more detail here. Residents of high-rise buildings should know what part of the land belongs to them by right.

Which asphalt is best for the yard?

So, let's figure out which asphalt is better? Conscientious road repair companies will never offer you to lay asphalt suitable for the roadway in order to increase the cost of the work. Ideal for yard “clothes” - a fine-grained mixture. The top layer of asphalt concrete is made from medium-sized “grain”: gravel with a diameter of up to 20 mm. What does this give? Smooth surface that is easy to clean. It has a long service life and an affordable price.

Before laying the finishing layer, a certain amount of time passes from the start of work, which is necessary for the installation of the lower layers:

• excavation;
• sand layer;
• crushed stone base;
• installation of curbs.

Paving of commercial and government facilities

We actively cooperate with enterprises of any field. We carry out work on laying courtyards near business centers, hypermarkets, markets and warehouses. We take part in the construction of parking lots near office buildings and commercial buildings. Our strengths and skills are used in the improvement of housing complexes, when it is necessary to improve the territory in the courtyards. We carry out asphalting of sidewalks

for pedestrians, we do our work efficiently and on time.

landscaping from our company We build perfectly smooth playgrounds in the courtyards of educational and sports institutions, lay asphalt in front of administrative buildings and medical institutions. In addition, we carry out routine and major repairs of damaged road surfaces. For paving yards

Our prices are affordable, and we do not skimp on the quality of asphalt and do the work conscientiously.

What is the difference between asphalt paving and asphalt patching?

If road workers make a high-quality surface, you will forget about potholes and potholes in your yard for a long time. The top layer has begun to “crumble” - ask the management company for patching repairs in compliance with the “patching” technology. First, the lower base is leveled, compacted, and only then the holes are filled with hot or cold asphalt.

The management company carries out repair work for a separate fee from residents, unless otherwise provided by an additional agreement.

Typically, covering the local area with asphalt occurs like this:

Conclusion

It is quite possible for residents of an apartment building to lay good asphalt in the yard using municipal funds and their own funds. Control all stages of work, include warranty periods in the contract, and your yard will become a hallmark of the respectability of the residents.

What is a lawn in a yard, read our article.

For additional information on this issue, please refer to the “Home Management” section here.

Free legal support by phone:

Attention! Due to recent changes in legislation, the legal information in this article may be out of date!

SK-WD specialists will paving roads in cottage villages and in the courtyards of cottage plots at an attractive price, with high quality and on time. By contacting us, you give preference to working with professionals.

Asphalting refers to covering areas with asphalt. This is a rather labor-intensive and complex process that requires special knowledge and skills from workers. A competent approach and strict adherence to technology make it possible to create a durable coating throughout the entire territory; incorrect installation will lead to its rapid destruction and the need for repair.

The process of creating a reliable coating is impossible without the use of high-quality equipment. SK-WD has at its disposal imported machines and devices with high performance characteristics. In our fleet you will find special equipment from well-known manufacturers.

The company's employees are experienced specialists who constantly undergo advanced training courses and get acquainted with new products in their field of activity. The two described factors are the basis for high quality and speed of work on asphalting areas.

Each of you is certainly interested in the following questions: the cost of asphalting roads in cottage villages, in the courtyards of cottage plots, turnkey price for asphalting? To get answers to all questions, you can call: +7(926)911-87-29, +7(926)91-56789 or write to us by email and check with our specialists who will competently They will draw up an estimate for the project, and will also accurately answer how much it costs to paving 1 m2

Get a free consultation

Improving roads in cottage villages and in cottage courtyards is one of the biggest problems today. Beautifully groomed courtyard areas , neatly laid asphalt pavement , clean streets - this always pleases the eyes of those around us and ourselves. But, unfortunately, the condition of the asphalt surface of most yards today leaves much to be desired. Many people are probably already tired of stumbling in swamps and potholes, or looking at the uneven road near their own yard. of paving roads in cottage villages and in the courtyards of cottage plots in Moscow and the Moscow region has recently become very popular .

Preparatory work before asphalting roads in cottage villages, in the courtyards of cottage plots

True, before carrying out high-quality asphalting of roads in cottage villages, in the courtyards of cottage plots in Moscow and the Moscow region, it is necessary to carry out a number of preparatory work. First, you need to think about where, for example, the children's playground will be located, where there will be parking spaces for cars and other vehicles, and where the sidewalk itself will be. Then you need to begin the process of cleaning the area. This is a very serious amount of work, which includes:

· cleaning up excess waste;

· removal of soil in order to subsequently create a good basis for laying asphalt pavement;

· preparing the site for laying asphalt.

This entire list of works is very important in the process of asphalting roads in cottage villages and in the courtyards of cottage plots . If you do not clear the area correctly and thoroughly and do not prepare it properly, problems may arise later. For example, it is very important to correctly set the basis for laying the future asphalt surface. This will further ensure that the asphalt will last much longer and will be much less susceptible to destructive factors.

Mistakes before asphalting roads in cottage villages, in the courtyards of cottage plots

There are often cases when residents of cottage villages themselves get together and begin to prepare the territory for further asphalting of roads in cottage villages, in the courtyards of the cottage area , and the laying of asphalt is carried out by a private company that provides such services. Thus, people are trying to save money.

This approach is not entirely correct, because the process of clearing the territory and preparing a reliable foundation for future asphalt must be carried out using special equipment. This is almost impossible on your own.

But even if the entire list of preparatory work is done by the residents themselves, then in the future there is a possibility that the installed asphalt surface will not last long and will collapse. Therefore, it is better to entrust all preparatory work before asphalting roads in cottage villages, in the courtyards of cottage plots in Moscow and the Moscow region to a special company that deals with this. These organizations have special equipment and all the necessary equipment with which their workers will be able to properly prepare the area for further laying of asphalt pavement . Thus, the asphalt will last longer and will deteriorate less.

Ours has long been engaged in asphalting roads in cottage villages, in the courtyards of cottage plots in Moscow and the Moscow region , and also provides services such as paving a yard or paving the yard of a private house .

We have all the necessary list of machinery and equipment for preliminary preparation of the territory. Before laying the asphalt, our workers create a reliable base from a mixture of cement and bitumen. This approach will ensure a longer service life of the asphalt pavement and its durability. In addition, if necessary, we can lay asphalt in two layers if necessary. It all depends on the load that will act on this section of the road.

At the same time, our prices are much lower than those of other companies. Also, when ordering the service of paving roads in cottage villages, in the courtyards of cottage plots, we will offer you an option for planning the territory.

Our specialists pave roads in cottage villages and in the courtyards of cottage plots . Our employees can also repair city roads in Moscow and the Moscow region.

The main advantages and disadvantages of asphalt pavements

• optimal price-quality ratio due to the low cost of materials used;
• simple asphalt laying technology that allows you to do the work yourself;
• speed of covering even large areas compared to the installation of concrete or prefabricated paving slab structures. Installation is completed in a few hours;
• ease of repair of damaged fragments
• when framing areas, paths, flower beds with small borders, a beautiful and aesthetic appearance of courtyards is obtained;
• waterproof coating
• sufficient strength, reliability and durability when properly executed;
• asphalt paving at the dacha will not allow weeds to grow through the coating;
• the possibility of using specialized technical means;
• ease of maintenance, in the summer it is enough to sweep away the debris with a broom and wash the surface with a regular garden hose, and in the winter it is convenient to remove snow on a flat surface.

• characteristic odors emanating from asphalt in the heat, especially in the first time after paving the site, which is due to the presence of bitumen components that emit unpleasant odors when heated, creating a certain discomfort;
• yard areas are mainly compacted with hand rollers, which does not ensure high strength of the upper layers. As a result, asphalt heated by the sun's rays can become deformed under the weight of heavy vehicles;
• difficulty when it is necessary to deliver small volumes of asphalt mixture to the site for fragmented repairs. Most suppliers may refuse this due to lack of profitability;
• inability to compete in beauty of appearance with expensive coatings.

This is interesting: Law on the local area of ​​a private house

The experience of a construction company is the key to success in paving the territory!

Our organization stands out among its competitors in that we guarantee highly professional, comprehensive implementation of absolutely all construction and installation work. Our organization has high-quality equipment of the best quality. We carry out our work using our own fleet of equipment intended for construction and asphalting of the territory. This gives us the opportunity to carry out assigned tasks as efficiently and efficiently as possible. We pay great attention to the condition of our vehicle fleet, maintain its technical condition at the highest level of performance as possible, and with the help of them the productivity of our activities depends!

Our experienced employees understand the asphalt paving service, so their skills are used in the right direction. The Asphalt-Doroga LLC organization guarantees its clients the ideal quality of work performed, reliability and a personal approach to each of our partners. Our company is ready to perform asphalt paving of the territory in Moscow and the Moscow region. We do our work thoroughly and on time. We follow the technology of laying asphalt on the territory!

Composition and types of asphalt concrete

Asphalt concrete is an artificial material obtained by rational selection of mixture components and its compaction after laying. Depending on the incoming components, the ratio of their mass parts and physical characteristics, there are many types of asphalt, divided into brands and types.

The composition of any asphalt concrete includes:

• mineral powders obtained by crushing rocks with a high content of carbon compounds (limestone or other fossilized organic deposits). The high content of such powders gives the material increased viscosity combined with strength. The property of such mixtures to dampen internal vibrations of structures without the formation of cracks in the coating allows the construction of road passages on road bridges. Successfully used for paving roads and sites
• bitumen, contained in most types in small quantities (from 4 to 5%). The exception is cast mixtures containing ≥ 10% bitumen. Bitumen gives the mixture increased fluidity, facilitating its distribution over the coating area, and elasticity after compaction and hardening. The main use of cast asphalt is paving of areas with complex terrain and repairing road surfaces. Increased bitumen content is used for asphalts laid in harsh climatic zones, at low temperatures and the need to open traffic immediately after the completion of a section of road or bridge crossing;
• sand is used in most types of asphalt concrete, the only exception being mixtures with a high gravel content. Natural sands are thoroughly cleaned, while artificial sands, obtained by crushing rocks, are immediately ready for use;
• crushed stone or gravel, which plays the role of a protective component that forms the asphalt concrete frame to absorb significant loads.

Based on the content of fillers, the following types are distinguished:

• A - from 50 to 60% crushed stone;
• B - 40...50% crushed stone or gravel;
• B - gravel or crushed stone from 30 to 40%;
• G - sand or screenings from crushing ≤ 30%;
• D - content of natural or artificial sands up to 70%.

Depending on the largest sizes of mineral grains in the mixture, they are divided into the following classes:

• coarse-grained first class - ≤ 40 mm. Used for paving highways with heavy traffic of heavy-duty vehicles and other highways of different classes;
• second class - with small grains ≤ 20 mm. Installed on pedestrian streets and squares;
• third - sand mixtures with grains ≤ 10 mm. Small fractions of grains are in close contact, which allows you to create perfectly smooth surfaces. The main purpose is pedestrian sidewalks, garden paths, improvement of courtyard areas and sports grounds.

The second brand is most widely used in asphalting roads, their repair and arrangement of private courtyards with the construction of transport entrances.

Depending on the laying temperature, asphalt mixtures are divided into 2 types:

1. Hot, laid with a temperature of ≥ 110 degrees. The hot mixture is transported by special transport, called Kocher, or in dump trucks with a heated body. If necessary, preparation for asphalting is carried out by softening the base under the influence of high temperatures. After leveling, the mixture is rolled with rollers. The resulting durable coating is most widely used in road work and landscaping of urban and suburban areas;
2. Cold ones, which are placed with temperatures ≥ 5 degrees. When preparing, bitumen with a reduced viscosity is used, which allows the mixture to remain in a loose state for a longer time, and after rolling it hardens faster. Most often, such asphalt concrete is used for pothole repairs, laying on sidewalks and courtyard driveways that are not subject to intense loads.

Any high-quality asphalt concrete can only be made from certified materials, therefore, when ordering, you must require quality certificates and a passport for asphalt concrete.

Types of Asphalt Pavement

There are two main types of asphalt – natural and artificial. The first is obtained after chemical and physical transformations that occur in rocks with the simultaneous involvement of oil fractions on the very surface of the soil. The second type is the result of a manufacturing process where crushed stone, sand, mineral powder and bitumen are mixed.

Natural and artificial asphalt

Manufacturers are constantly working on the composition and methods of obtaining the product so that the raw materials are of even higher quality. Hot type asphalt consists of viscous bitumen, mineral powder mixtures, sand and gravel. All ingredients are mixed into one mass under high temperature. This product is suitable for use immediately after manufacture, otherwise it quickly loses its properties.

In the production of cold-type asphalt products, bitumen is used in liquid form. Subsequently, substances are added to the resin mixture that act as hardening retarders.

The cast coating contains the same materials as the hot coating. The difference is that in this case more bitumen and powder are taken. The features of cast asphalt are its relief and small thickness, while the quality and performance indicators are two to three orders of magnitude higher than other types.

The production of colored asphalt mixture can be done using a cold or hot method. Crushed stone and colored paint are added to the standard set of materials.

Asphalt comes in the form of crumbs. It can be obtained from the old coating by milling or crushing. The quality of the final product depends on the composition of the resulting mixture and the type of cutter.

Production of colored road surfaces

Stages of paving

For laying asphalt, it is recommended to choose dry weather with a positive temperature of ≥ 10 degrees.

The step-by-step procedure includes the following work:

1. On a sheet of graph paper, a diagram of the location of the house, outbuildings, paths to them, the area around the house and the passage for the car is drawn to scale. The roots of growing trees can deform the covering, so it is desirable that the trees are located at a distance of ≥ 2 m from the intended contours.
2. Calculation of material requirements. It is recommended to cover the entire area with geotextiles with an overlap on the walls and cover it with a layer of sand 10 cm thick, crushed stone for the paths will be needed 5 cm thick, for the platform 15 cm, and directly for the driveway 25 cm, the number of enclosing elements is calculated according to the length of the contours, subject to asphalting. Asphalt will be required in the amount of 1 t per 10 m2 with a layer thickness of 5 cm; on driveways it is recommended to lay asphalt in two layers (5 plus 3 cm). The order is made for hot, fine-grained mixtures; sandy ones can be laid on the paths, but they are also hot.
3. Prepare the following tools:
   a shovel for each worker;
4. durable cord;
5. mop-mop made of a meter-wide board with a handle 2.5 m long;
6. a manual rammer, which is a piece of timber or round log with a square metal plate (20 cm side) fixed at the base and a handle in the form of a longitudinal wooden plank nailed on top;
7. manual roller weighing ≥ 100 kg.

This is interesting: The position of the Supreme Court on the redistribution of land plots

To periodically lubricate the tool to prevent hot asphalt concrete from sticking to it, you will need a small amount of diesel fuel.

• Transferring the outlined contours to the terrain with wooden pegs.
• Excavation of soil to the depth of the listed layers with removal of roots of weeds, bushes and trees. The asphalt surface should be level with the surrounding surface of the earth or rise up to 5 cm (it all depends on the terrain and your desire). Base seal.
• Installation of curbs at the same level as the future asphalt concrete or 2...3 cm higher. First, curbs are installed along the edges of the path or area, leveled in height, a cord is pulled along which intermediate elements are laid out. Fixation of curbs is carried out using cement mortar and filling with compacted soil.
• Backfilling with sand, for effective compaction, wetting the sand cushion with water is used, laying geotextiles to reduce the pressing of crushed stone into the sand.
• Laying crushed stone with careful rolling with a roller. Larger fractions are placed downwards, and decluttering is carried out on top with smaller fractions. Compacted crushed stone is poured with bitumen mastic.
• The delivered asphalt is unloaded in separate piles. To prevent it from cooling down, the layout must be done quickly with the assistance of several assistants. Leveling is done using a motor mop. One person begins rolling the surface with a hand roller; to achieve greater effect, a person with a solid build can stand on the roller. With the provided transverse slopes, rolling is carried out from the bottom up. The movement of the roller should be smooth, without jerking. It is important to maintain the same number of passes on all lanes. It is unacceptable to stop the roller on areas that have not frozen to avoid sticking to the coating. In hard-to-reach places, the asphalt is compacted using hand compactors. We must not forget about the need to periodically wet the instruments with diesel fuel. If possible, it is recommended to roll most of the surface with large rollers or vibrating plates, available in specialized organizations. This will significantly increase the strength and quality of the laid coating.
• Finally, you can paint the entire asphalt area with special asphalt paints to obtain the required shades.

At this point the work can be considered completed.

Paving yards

Asphalt is a consumable material that must be processed as quickly as possible. This is due to the fact that it hardens very quickly. At the same time, at the most inopportune moment, some shortcomings and unaccounted moments begin to appear, delaying the process. In fact, you can not only ruin the site with poor-quality and incorrect work, but also throw away money spent on the material. There is only one conclusion here - an invitation to paving the yard by professionals who are responsible for the quality of the work performed. Our company has been actively working in this area for more than 10 years and has earned a positive reputation not only among legal entities, but also among ordinary citizens. We are ready to perform any amount of work related to such a service as paving yards. It should be noted that our company has its own fleet of special equipment. This allows not only to quickly and efficiently lay asphalt, compact the surface and “cushions”, but also to deliver asphalt exactly at the time when it is most convenient for the customer and advisable in terms of compliance with the technological process. In conclusion, it is worth saying that you should not trust the work to small , “mobile” teams consisting of illegal workers. Of course, in this case you can save money, but can you vouch for the quality, and who will correct the shortcomings if any appear? Our company provides guarantees for paving yards. They will be relevant for 3 seasons. Contact us, you will not regret the fruitful and mutually beneficial cooperation. If you need high-quality, fast turnkey paving of your yard and at an affordable price, then it’s difficult to find a better contractor than our company.

First you need to clear the area from the surface layers of loosened soil. If there was an old asphalt surface, it must be dismantled. The cleaned area is compacted with a roller, after which it is covered with a special material that prevents mineral fillers from sinking into the ground; The next stage is preparing the base for asphalt work. At this stage, the main thing is to accurately lay out the substrate, using sand, crushed stone or gravel and soak it with bitumen; Next, the coating is laid out and distributed; Finally, using a hand roller or vibrating plates, the asphalt mixture is compacted. In addition to volume and complexity, the cost of the work performed on laying the pavement is also affected by the composition of the raw materials used for asphalt.

Roads are asphalted using modern building materials and technologies. In addition, our company owns its own fleet of modern, high-performance special equipment, which ensures high quality work, compliance with road construction technology, and high productivity.

How is the asphalting of the local area of ​​an apartment building carried out?

How is the asphalting of the local area of ​​an apartment building carried out, who is responsible, what quality should the materials be? These questions worry many residents who are trying to improve their yard and make it better. In this article we will look in detail at how pothole repairs are carried out near a house.

Who pays and repairs?

Just a few years ago, all areas that belonged to an apartment building and the facilities located on them (playground for children, basketball/football field, horizontal bars, etc.) had to be looked after by housing and communal services companies.

However, not so long ago amendments to the Housing Code were adopted, which affected Article No. 158. Now all citizens living in the house must finance the process of improving the courtyard area. That is, payment for such work is transferred to the residents. In addition, they must pay for repair services performed by the management company’s specialists, including asphalt paving of the local area.

The first paragraph of the above article states that the material part of the issue related to laying asphalt is resolved by residents. They can form a special fund for this purpose by collecting monthly contributions from the residents of the house. In addition, it is advisable to first submit an official appeal to the director of the management company with a request for help in solving the problem. If there are unallocated financial resources and the necessary road equipment, management company employees will be able to lay asphalt pavement (or pothole repair) on their own.

It is definitely worth concluding an agreement with contractors, clearly recording the details of payment and the conditions for delivery of the finished work.

Nobody forbids residents to follow the procedure or make adjustments. If the services are provided improperly, then you can demand a reduction in fees. In the event of a controversial situation, based on the agreement, it is worth filing statements and complaints to higher authorities (housing inspectorate, prosecutor's office, court).

We are professionals in the field of paving courtyards in Moscow

Asphalting courtyards, including asphalting private courtyards, is no different from conventional asphalt paving technology, however, this process is more labor-intensive than paving in open areas. Quite often, paving of courtyards is carried out in inconvenient conditions, which significantly complicates the use of special road construction equipment. During this work, it is extremely important to thoroughly approach the planning of all stages of the work, decide which side is best for the equipment to approach, while minimizing the risks of destruction at the work site.

Our company employs only professionals who have all the necessary knowledge and experience. Our workers know a lot about asphalt paving, because they have experience working on various sites. Paving your yard will truly transform its appearance! The result of our work will definitely please you, and high-quality asphalt will last for many years. Construction from Asphalt-Doroga is distinguished by durability and a perfectly smooth surface.

Which asphalt is best for the yard?

It is worth knowing that different methods of preparing asphalt are used for highways, city roads, alleys, and local areas. For the specific situation discussed in this article, fine-grain material is best suited. This coating will be smooth (safe for children), more even and attractive.

• First, the old canvas is removed and a recess of at least 20 centimeters is made.
• Then a “protective cushion” (about 5 cm) is formed from crushed stone, crushed pieces of old asphalt, gravel;
• How to asphalt the local area? Next comes a layer 15 cm thick, which is compacted tightly with a roller. But to increase durability, it is better to make two layers of 8-10 cm each.

What does asphalt paving work include?

As soon as the management company draws up an estimate and submits it to the residents for consideration, the latter will be able to familiarize themselves with the list of work that will be carried out by the contractors. Here is a list of standard actions that the vast majority of apartment building residents order:

• Laying asphalt around the perimeter of the structure. The width of the canvas is 1 meter, starting from the walls;
• Asphalting areas near entrances (width - about 5 meters);
• Covering parking lots where residents’ personal vehicles are located;
• Improvement of areas for sports and children's entertainment.

This is interesting: Choosing a legal address for an LLC

Despite the listed values, people can indicate their preferences in the contract, having previously agreed on them with the management company, so that the wishes do not lead to any disruptions in the functioning of engineering systems.

What should yard asphalt be like?

In order to lay the coating around the house, a fine-grained mixture is used, which looks aesthetically pleasing and ensures a smooth surface after asphalt.

• Canvas thickness – 10 cm or more
• The thickness of the sand and crushed stone layers is 4-5 cm
• The minimum width of the asphalt pavement is 1 meter
• In the courtyard of an apartment building, it is necessary to lay asphalt near the house, design the area near the entrances, parking, and paths leading to playgrounds and sports grounds. To increase the service life of asphalt concrete, several layers of asphalt can be laid. Asphalting of courtyards is possible only in those areas that belong to the house according to the cadastre.

Who should do the asphalting of the local area?

You must contact the management company immediately. Upon request, an internal account will be opened to collect the funds needed to carry out the repairs. The residents themselves must hold a meeting and convey their intentions to all residents of the house, so that everyone is “FOR” and does not oppose the donation of funds.

When the required amount has been collected, representatives of the management company must find a group of specialists who will take on the work and receive payment after the delivery of all objects.

The period should not exceed 7 days. During the first day, the “cushion” is prepared, and in subsequent days, bitumen is laid. That is, it can be completed in 2-3 days if the territory is small and without complex landscape nuances.

Pothole repair of asphalt in the local area is carried out according to a similar scheme.

If controversial issues arise that cannot be resolved through contractual means, then it is worth involving lawyers. Legal professionals will be able to analyze the situation and offer the best solution to the problem. There is a video about this that we recommend watching:

Who pays for and performs the asphalt paving work?

Previously, housing management companies monitored the surrounding areas of an apartment building, as well as places where there is a playground, sports facilities and other facilities created to improve the living standards of residents.

But after the adoption of amendments to the law, according to Article 158 of the Housing Code of the Russian Federation and its part 1, all residents are required to participate in the financing of programs for the improvement of common areas related to an apartment building.

After the entry into force of the Housing Code, the management company, for an additional fee, is obliged to carry out work to improve the aesthetic and operational qualities of objects in the local area, including asphalt paving.

According to this clause, all financial issues related to laying asphalt must be resolved by the residents themselves, by forming an appropriate fund or by turning to the management company for help. After collecting funds, she hires workers or, if she has special equipment, can independently carry out all the necessary work.

At the same time, residents have every right to control and coordinate the laying of asphalt. In case of improper repairs, residents have the right to demand a reduction in the service fee or contact higher authorities to resolve the situation.

Requirements for asphalt pavement in the yard

The cost of laying asphalt in the local area is much cheaper than building a road, because the pavement will be subject to minimal traffic loads. The thickness of the base of the asphalt pavement in the yard ranges from 5 to 10 cm, and the asphalt layer is 4 cm. However, it is better to calculate such characteristics individually, focusing on the composition of the soil and possible loads.

Experts will help you make the correct calculations and perform asphalt paving. Contact us and be sure of the quality of coverage for your local area.

Which asphalt is best for the yard?

To improve the area around the house and next to it, it is better to order fine-grained asphalt. It looks more attractive and allows you to create a smooth and safe surface. Before laying, you should first lay down a protective layer, which can consist of crushed stone, gravel, concrete and even old asphalt.

The thickness of the base should be approximately 4-5 cm, and the layer of the asphalt coating itself should be at least 15 cm. For better performance, the material can be laid in two layers, this will significantly extend the life of the coating.

Prices for paving yards

What is included in the scope of work?

After creating a special account, residents can independently, together with the management company, determine the scope of work for the hired organization. Usually the mandatory program includes:

• one meter from the walls around the house along its perimeter:
• three to five meters from the entrance;
• parking for cars of owners living in an apartment building;
• sports grounds, if they were equipped near the house or are planned to be built;
• areas on and near the playground.

This is necessary to exclude controversial issues and illegal interference in areas not related to an apartment building.

Benefits of cooperation

The road construction company DSKkapital has been specializing in landscaping for 10 years. During this time we:

• expanded the possibilities. We carry out asphalt paving of territories, courtyards, playgrounds, paths, highways, and at the same time we offer other improvement options: landscaping, landscape design. Other offers include rental of special equipment;
• acquired resources. The main advantage of our company is specialized road construction equipment. It provides professional asphalting of the territory, simplifies the work process for employees and speeds up the time it takes to complete the work.