Registration of water meters in the EIRC via the Internet: features of the procedure

Deadlines for the procedure

There is no specific period of time during which the flow meter must be registered. But there are a few relevant points:

1. 
   After installation, the water meter must be sealed, and the owner must have a certificate of its commissioning in his hands.
   Until this moment, accruals to the receipt are according to the established standard (with an increasing factor of 1.5).

   However, if the user is in no hurry to register, the management company will not be able to make payments under the new conditions.

   Therefore, until the water meter is registered, the resident will have to continue to pay standard tariffs, according to the number of registered people. The law does not provide for special fines for the fact that the water meter was not registered immediately after its installation.

2. The device has its own state verification period, counting from the moment of its last verification. If the equipment is new, then the starting point is its initial verification at the manufacturer. This means: the longer the meter is not officially registered, the shorter its service life will be until the day of its next verification.

Documents issued when checking water meters

You have installed meters, constantly transmit information to the water utility and pay all receipts on time, but now comes the time for verification, and with it a lot of questions. In general, the verification of meters is strictly regulated. And after all water meters are checked, the user must receive certain documents from the inspection company.

How verification is carried out

When you invite specialists from a certified company, they carry out verification at home, using a device tested in a metrology laboratory and guided by a legally approved verification methodology. Certain measurements are carried out, after which specialists render a verdict on whether the meter is suitable for further use.

If the water meter is considered to be in good working order, then the consumer will definitely receive several documents confirming this fact. In addition, a record of verification must be made in the technical passport of the device.

At the end of the verification work, the user is left with the following documents:

• Certificate of work performed;
• Agreement for maintenance of water meters between the home owner and a specialized organization;
• Verification certificate: it is issued if the detected measurement error does not exceed acceptable limits, that is, no obstacles to further operation of the meter are found.

Main points of registration

After installing the meter in its place, the user needs to register it. Tips on how to do this correctly will be discussed below.

Where can?

The documentation must be submitted to the office and the act of putting the device into use must be signed.

You can do this in:

• management company;
• resource supplier office;
• MFC;
• information and settlement center (IRC).

Unfortunately, online registration through State Services is not possible . This service is not provided on the Internet.

There, documents are submitted on the spot and an agreement is signed on the possibility of paying for consumed water based on the readings recorded by this device. Since the user’s signature is required when concluding an agreement, he is required to personally visit the authority.

It will not be possible to register online. But in order to pay for water use, you can send water meter readings every month through the online service of the above services or by telephone.

Required papers

To successfully register a water meter, the user must provide the following documents:

1. Meter data sheet. If you need to register two devices - for metering cold and hot water - you must present both technical passports.
2. An agreement concluded with a service company for the purchase of a water meter (in the case where the water meter was purchased by the user himself).
3. Agreement with maintenance conditions.
4. Certificate confirming the commissioning of the meter.
5. Certificate of work performed on installation of the device and its adjustment.

Where can I go for help when registering meters?

Our company’s lawyers recommend taking a closer look at how to register water meters without wasting time and effort. This tedious procedure can be undertaken by the company’s specialists. Our work begins from the moment you receive a package of documents from the management master. Don’t delay resolving the issue, because only registering water meters will allow you to pay less. While you are thinking about where to go, you are charged according to the norms.

With us, you can quickly register water meters via the Internet without leaving your home. What will you need?

• Install measuring equipment.
• Collect a package of papers.
• Leave a request online on our website.
• Write a power of attorney for a representative of our company.
• Give him a package of papers.
• Get a contract.

Our specialists will register water meters for you. We will send the documents to the EIRC, carry out the registration and give you the supporting documents. To make sure that the installation was successful, you need to call your local service organization.

Price of the procedure

Registration itself is free. But you will have to pay for the purchase of a meter and its installation (if the user cannot install the meter himself). The price of the device starts from 500 rubles.

Installation of a water meter will cost the most if it is not carried out by the owner of the house - up to 3,000 rubles for metal-plastic pipes, up to 4,500 rubles for copper pipes. for two counters.

Submission of documents and final result

The collected package of documents is provided to one of the organizations mentioned above, and it enters the device into a unified information database. Registration of the counter does not take long - about 15 minutes.

During registration, the following information is entered into the database:

1. Year of manufacture of the water meter.
2. Serial number.
3. Installation date.
4. Initial readings at the time of installation.

A stamp is placed on the act of commissioning and the technical passport, confirming that the device has been officially registered with the state.

Installation Features

The device can be installed in the following ways:

1. On one's own;
2. With the involvement of a licensed organization (the cost of installation by a professional, from a private company - 800 to 4000 rubles per meter).

If the product is installed by the owner himself, before registration it is necessary to confirm the correct connection of the device by contacting the management company. The organization’s specialist will check the meter and draw up a report confirming the correct installation.

The installation of a water meter is carried out under the condition that the water supply is shut off. A crane is pre-installed on the insert. The meter is mounted assembled with a filter element that prevents foreign particles from entering the device, and a shut-off valve that prevents water from flowing back in the system.

We recommend: How many liters in a cubic meter of gas

If you want to install the meter yourself, watch the video on the Internet or YouTube, how experts do it:

Nuances of the process in different situations

The registration process itself is the same in all cases - collecting documents, submitting them and registering the water meter. The difference is in the preparatory stage - installation. The further sequence of actions depends on who performed the installation.

If the water meter was installed independently or by the management company

Many people believe that installing a water meter yourself is a significant saving . This is true.

By purchasing a meter in person, you can save money that would otherwise go into the hands of management company employees.

However, the installation of the device must be carried out according to all parameters , and after its installation you will still have to call a representative of the service company to seal the water meter.

If the specialist does not put the meter into operation the first time due to its incorrect installation, the second and subsequent removals by the management company employee will already be paid for.

The specialist will check the device itself and the correctness of its installation , and if there are no complaints, he will issue the relevant documents that will need to be provided to register the water meter.

If the installation was carried out by a certified organization or management company, it must also issue certificates of putting the device into use.

For cold water and hot water meters

Registration of cold and hot water supply meters is no different.

The only peculiarity is that if one of the meters is registered, then a technical passport for this type of water meter is submitted, and if both are required at once, then accompanying documents are needed for both devices.

How to independently register meters in the EIRC?

It is worth preparing for the fact that the procedure may not be easy. Therefore, it is better to find out where to register water meters in Moscow without wasting time and effort. If you decide not to use intermediaries, then you need to go through the following procedure:

• Contact water utility representatives. From this moment, registration of water meters in Moscow and the transition to an economical payment system begins.
• Arrange to check the correct installation. Even if you decide to change your measuring equipment to new ones, you will still have to go through this stage. Find out in advance what documents are needed to register water meters with the EIRC in order to request all of them from the service representative. It may take time for a specialist to arrive.
• Sealing of equipment. The measuring equipment will be registered only after each device is sealed. Data on the implementation of the procedure is entered into the documents for water meters and submitted to the EIRC.
• Fixing the initial flow meter indicators.
• Drawing up and signing a water supply agreement.
• Collection of documents.
• Innings. Having decided where to register water meters, do not forget to find out the hours and principle of reception of citizens. This way you won't have to travel multiple times.
• Waiting for results.

Only a registered water flow meter gives the tenant the right to switch to a cost-effective payment system for water utility services. If it is not possible to spend a day or two going through the procedure yourself, you can find out how to register water meters in Moscow via the Internet through our company.

So that there are no problems

You need to purchase a new meter only in specialized stores that provide a certificate for the water meter and a technical passport for it.

You should also make sure that the device is registered in the State Register of Special Measurements, and the serial number indicated on the meter dial matches the number in the technical passport.

Basic rules for installation that will allow you to quickly put the water meter into operation the first time:

• the meter must be mounted at the inlet of the water pipe;
• connections and connectors must have access to subsequent sealing;
• The diameter of the meter passage must correspond to the standard - 15 mm.

If you want to learn more about water meters, take a look here.